Rooms and areas that got wet
New York
Our hands-on restoration team extracts water from carpet and padding, treats areas that got wet, and determines whether the flooring can be safely restored.
Signs to keep an eye out for
Before we get to work, if you notice any of these problems, call us before water has more time to spread into nearby materials.
To straighten this out, a saturated cushion holds right around a gallon of water for every 10 square feet of floor. In plain words, an average bedroom is 10 to 15 gallons before the subfloor is counted.
In plain words, cut pile carpet wicks water up and evaporates from the tips, so the surface reads dry.
To straighten this out, carpet pulls water outward and upward at the perimeter.
To straighten this out, wet carpet gets heavy and pulls free of the tack strip pins.
Once we are on the job site, seam tape is held with adhesive that softens when it stays wet.
To straighten this out, latex adhesive between the face and the secondary backing breaks down as it stays wet.
What happens
Our hands-on restoration team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
Once we are on the job site, we go over the pile, the pad and the subfloor with a moisture meter before starting. To straighten this out, the reading through to the deck settles the method, not how wet the surface feels.
To straighten this out, a weighted extraction tool presses the carpet and cushion into the vacuum slot so water leaves the backing.
In plain words, floating means detaching one edge and pushing air between the carpet and the cushion.
In plain words, water concentrates at the walls and under the tack strip line, where a big tool cannot sit flat.
To straighten this out, we keep tools off open seams and support loose edges instead of dragging on them.
In plain words, air movers are placed to sweep the surface or the space under a floated carpet, and an Professional dehumidifier removes that moisture from the air.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
Here is how we as a rule handle carpet extraction near New York.
To straighten this out, say how much water is on the carpet, what it came from, and how many hours it has been there.
Your callOnce we are on the job site, walking on soaked carpet drives water deeper into the pad and stresses the backing.
+5 minutesBefore we get to work, a technician meters the pile, the pad and the subfloor and checks the seams and the tack strip.
On arrivalTo straighten this out, the truck mounted extractor pulls the standing volume out of the assembly first. In plain words, most of the water in the room leaves during this stage.
First hour on siteIn plain words, weighted and self propelled tools work the room in overlapping slow passes, then the perimeter and closets get detailed.
Day 1In plain words, if we float, an edge is detached and air is pushed between the carpet and the pad.
Day 1, eveningOnce we are on the job site, the same points get read every visit and logged, including the subfloor under the assembly. Before we get to work, carpet is as a rule the first layer to reach target and the deck the last.
Day 2 to 3Understanding the cost
We spell out the recommended work and price before you approve the job. These examples show what may change the price breakdown.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Carpet and pad extraction, one to two rooms, pad left in place | National price breakdown for the extraction stage only. Drying gear is billed separately per unit per day. | $350 to $1,000 |
| Carpet extraction priced by area, clean water | National price breakdown for the mechanical extraction stage on typical residential carpet and cushion. | $1 to $3 per square foot |
| Whole floor of wet carpet, three or more rooms | National price breakdown for extraction across a connected carpeted floor, before drying gear and cleaning. | $700 to $2,500 |
| Drying equipment only, one carpeted room, three days | National price breakdown for the equipment line alone, based on typical air mover and dehumidifier day rates. | $300 to $700 |
| Hot water extraction cleaning after drying, per square foot | National price breakdown for cleaning and grooming the carpet once the assembly is verified dry. | $0.25 to $0.60 |
| Reattach and stretch a floated carpet, per square foot | National price breakdown covering laying the carpet back on the tack strip, stretching and minor seam repair. | $0.60 to $1.50 |
Square footage of wet carpet
We measure the wet area with a meter, which is frequently smaller than the room. Water spreads unevenly and stops where the pad stops taking it.
How saturated the pad is
A damp assembly takes a couple of passes. A pad holding water left standing takes many slow passes and more equipment days.
Float versus pad removal
Floating keeps your carpet and pad in place and saves material cost. Pad removal adds tear out, disposal and new cushion, but frequently shortens the drying by a day.
Carpet construction
To straighten this out, cut pile releases water readily under a weighted tool.
Access and furniture
Once we are on the job site, stairs, tight hallways and heavily furnished rooms slow the tool down.
Equipment days
Air movers run right around $25 to $40 per unit per day and Professional dehumidifiers right around $70 to $110 per unit per day.
Why timing matters
Once we are on the job site, water can keep moving into nearby materials even when the surface looks dry.
To straighten this out, latex adhesive holding the face to the secondary backing softens and lets go when it stays wet.
To straighten this out, older carpets and many rugs use jute backing, which shrinks hard as it dries.
To straighten this out, seam tape adhesive fails after a day or two under water. In plain words, what was a drying job becomes a drying job plus flooring repair.
To straighten this out, as the assembly dries, water travels up through the fibers and carries old soil with it.
Helpful service information
In plain words, start with the short explanation. Once we are on the job site, open a card if you want a little more detail.
The slot has to seat flat so it seals against the secondary backing, since that is the layer holding the water.
Carpet extraction is decided at the vacuum slot. The slot has to seat flat so it seals against the secondary backing, since that is the layer holding the water.
One edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
Floating a carpet is the technique that saves both layers. One edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Carpet is built in layers, and water attacks the glue between them. The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Help near you
Choose your area below, or call (833) 493-2559 and describe what happened.
You may also need
Our hands-on restoration team removes saturated carpet padding when it cannot be safely dried, helping protect subflooring and reduce lingering odor.
Get a Quote: (833) 493-2559Our hands-on restoration team uses professional extraction equipment to remove water from flooring and building materials before detailed drying gets going.
Get a Quote: (833) 493-2559Our hands-on restoration team extracts water from upholstered furniture and cushions, then uses controlled drying to reduce staining, odor, and hidden moisture.
Get a Quote: (833) 493-2559Our hands-on restoration team removes surface water and dries moisture trapped beneath finished flooring to protect the subfloor and surrounding materials.
Get a Quote: (833) 493-2559Our hands-on restoration team dries walls, floors, framing, and other wet materials using balanced airflow, dehumidification, and repeat moisture numbers.
Get a Quote: (833) 493-2559Our hands-on restoration team removes water left standing quickly, limits further damage, and prepares affected rooms for controlled drying and cleanup.
Get a Quote: (833) 493-2559Our hands-on restoration team removes water left standing from floors and low areas, then checks nearby materials for hidden moisture and begins drying.
Get a Quote: (833) 493-2559Our hands-on restoration team removes water, damaged materials, and residue, then cleans and dries affected rooms so repair work can move forward.
Get a Quote: (833) 493-2559Common questions
In plain words, as a rule yes when the water was clean and we reach it within a day or two.
Once we are on the job site, we detach one edge from the tack strip and blow air between the carpet and the pad.
In plain words, water cleanliness first, then how saturated the cushion is, then the value of the carpet.
In plain words, the extraction itself is as a rule a few hours on one to two rooms. To straighten this out, drying the assembly commonly takes three days.
To straighten this out, a shop vacuum handles surface water up to about an inch and never reaches the backing.
To straighten this out, yes. Once we are on the job site, foot traffic drives water deeper into the cushion and stresses the backing and the seams.
In plain words, it is the face of the carpet separating from its secondary backing, since the latex adhesive between them failed.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our hands-on restoration team assess homes, businesses, and managed properties throughout New York and nearby communities.
View the area on Google Maps